When the check engine light is on,
our experts will diagnose the engine light codes and get the repairs you need to get back on the road - lights out and
worry-free!
There are hundreds of codes that could trigger your CHECK ENGINE LIGHT. Even the most common reasons can have many
possible causes. Some top CHECK ENGINE LIGHT codes are:
● Problem with the Mass Air Flow (MAF) sensor or circuit.
● System Running Too Lean. An oxygen sensor detected a lean condition (too much oxygen in the exhaust)
● System Running Too Rich: The oxygen sensor detected a rich condition (or a too-high fuel to oxygen ratio)
● Cylinder Misfire: A P0300 series of codes indicates a random or multiple misfire in your engine.
● Knock Sensor Circuit Malfunction: Your vehicle's computer constantly adjusts and retimes the engine so that it doesn't
produce harmful pre-ignition detonation or knock.
● Insufficient EGR (Exhaust Gas Recirculation) Flow
● Catalyst System Efficiency below Threshold
These are just a few of the hundreds of codes, causes, and symptoms. Each has multiple fixes.
Our expertise in vehicle diagnostics means we can quickly pin-point what is causing your CHECK ENGINE LIGHT to come on
and we will recommend only what needs repair. Fixed right on the first visit, every time!
Decoding your Dashboard:
Indicator Lights
Your dashboard is designed to keep you informed about
the health of your vehicle. Trust the dashboard indicator light
decoder to give you the insight you need to understand what is going
on with your car. From your check engine light to your oil pressure
light, we have the information you need to understand why that light
might be on…even if it’s because you’ve accidentally left your door
open or your parking brake up.
Simply review the dashboard indicators below and learn all about your
dashboard lights. If you are in a bad situation or require immediate
assistance, call us and we will do everything it takes to get you
back on the road safely and with confidence.
Anti-Lock Brake System Light
The Anti-Lock Brake System Light, also known as the ABS Light,
indicates that there is a malfunction in your vehicle’s anti-lock
brake system. The malfunction is logged by your vehicle’s onboard
computer system and the applicable OBD2 codes are readable only with
diagnostic tools. Issues triggering your Anti-Lock Brake System
Light can range in nature from a dirty wheel sensor to loss of
voltage. When the ABS light triggers, your anti-lock brake system
disengages and does not turn back on until your vehicle is serviced.
Even if the ABS light is on, you should have normal brake pedal and
stopping capabilities.
Brake Light
The Brake Light can be activated for a number of reasons. The
simplest cause is that the parking brake is engaged. If the brake
light is still illuminated after the parking brake has been fully
disengaged, there could be a more serious issue. Lack of hydraulic
pressure or a low fluid level due to leaking will both generate your
Brake Light – and both issues indicate an immediate need for
service. Brake fluid leaks are particularly dangerous as they can
cause your brakes to fail and contaminate different components of
your brake system. Make sure your brakes are still stopping your
vehicle if you are attempting to drive. If there is no brake
pressure at all, it is safest to stop driving and call for a tow.
Check Engine Light
The Check Engine Light is triggered by a systematic abnormality
detected by your vehicle’s onboard computer system. This light can
activate for a number of reasons that vary in severity. The check
engine light can trigger for something as simple as a loose gas cap
to something as serious as a faulty catalytic converter. Upon being
triggered, a fault code, also known as OBD2 codes, detailing the
nature of the issue is registered in your vehicle’s diagnostic
system. This fault code is stored and can only be retrieved via
diagnostic equipment. If your Check Engine Light is on, make sure
you bring your vehicle in for testing as soon as possible. If your
Check Engine Light is flashing, your onboard computer system is
logging a potentially dangerous problem and you should not drive
your car.
Battery Light
The Battery Light indicator triggers when there is an issue with
your vehicle’s electrical system. The
cause can be something small, such as a loose wire, or something
larger like your vehicle’s battery not properly holding a charge. If
this light turns on while you are driving, try to keep your ignition
running – if you turn your car off, it may not restart. Bring your
vehicle into our shop for a battery test. If you
are not able to get your car to start, we advise that you call for a
tow.
Temperature Warning Light
The Temperature Warning Light gauges the heat of your engine. If
the light engages, it is indicating that your engine is overheating.
Overheating can be the result of a low coolant level. If this light
activates while you are driving, immediately pull over and turn your
car off to let it cool. Do not open the radiator before your car has
had a chance to cool down as it could be very hot and cause an
injury.
Fog Lamp Indicator
The Fog Lamp
Indicator serves as a confirmation that your fog lamps are
illuminated.
Tire Pressure
Monitoring System
Your Tire Pressure Monitoring System Light, or TPMS
light, warns that there is a drop in air pressure in one or more
tires. You should add air to your low tire(s) as soon as possible.
If you add air and your tire is continuously losing air, you may
have a puncture in the tire.
Tire Rotation
The Tire Rotation Light triggers to let you know that it is time to
rotate your tires. Rotating your tires promotes even wear to extend
your tire life. Look for occasional promotions from us,
where
we package other preventative maintenance services such oil change
and/or brake inspections along with a tire rotation.
Door Ajar Light
The Door Ajar Light indicates that a door or trunk is not
closed properly. Please check all of your doors and your trunk to
ensure that they are closed. Upon closing properly the Door Ajar
Warning Light will disengage. If it does not, you may need your
computer reset.
Airbag Light
The Airbag Light indicates that there may be an issue with the
deployment of your air bags.
This is especially dangerous in the event of an accident. It is
advisable to have this matter diagnosed as quickly as possible in
order to keep you and your passengers safe.
Hazard Lights
Hazard Lights signal caution
to other motorists. This indicator is typically a lamp with a built
in switch that is used to operate the hazard flashers.
Service Engine Soon
The Service Engine Soon Light is triggered by a systematic
abnormality detected
by your vehicle’s onboard computer system. This light can activate
for a number of reasons that vary in severity. The Service Engine
Soon Light can trigger for something as simple as a loose gas cap to
something as serious as a faulty catalytic convertor. Upon being
triggered, a fault code, also known as OBD2 codes, detailing the
nature of the issue is registered in your vehicle’s diagnostic
system. This fault code is stored and can only be retrieved via
diagnostic equipment. If your Service Engine Soon Light is on, make
sure you bring your vehicle into our Repair
Facility for testing as soon as possible. If
your Service Engine Soon Light is flashing, your onboard computer
system is logging a potentially dangerous problem and you should not
drive your car.
Traction Control System Light
Traction Control is also known as Anti-Slip Regulation. Traction
Control engages in slippery driving conditions when wheels are
spinning out of synch. The system triggers your ABS system to apply
brake friction to even out and stabilize the wheels spinning out of
synch. When the Traction Control System Light activates, the
triggering device is disabled and cannot control the amount of wheel
slip in a driving situation. If the light remains illuminated for an
extended period of time, you might need an OBD2 code pull for
diagnosis.
Oil Pressure Light
The Oil Pressure Light indicates one of two things – Either the
sensor that activates the
Oil Pressure dashboard light has failed or your engine has low oil
pressure. Low oil pressure could be the result of a leak or your
engine burning oil. Check your oil levels with a dipstick and add
motor oil if needed. If your light stays on, we advise that you call
for a tow. If you are experiencing a leak or just need an oil
change, your closest store offers same day appointments!
Headlight Indicator
The Headlight Indicator serves as a confirmation that
your headlights are illuminated. If the clarity of your headlights
is less than optimal, try our headlight restoration products or
service package.
Low Fuel Light
The Low Fuel Light engages when your vehicle’s fuel sensing
unit hits a specified amount of resistance indicating the need for
more gas. If your low fuel light comes on, it is probably time to
fill up. Use these gas saving tips so you can Save Gas Now! |