Tire Rotation
Tire Balancing
If you are experiencing a high speed vibration or some shaking in your steering wheel your tires may be
out of balance. Having your tires balance checked at least every two years is recommended.
We use
the best balancer in the industry, that takes every tire for a test drive (so to speak) before it ever
goes on your car. This balancer is capable of finding imperfections in tires and or rims.
Often
confused with wheel alignment, a properly balanced wheel is a beautiful, perfectly tuned wheel-tire
combination. This is accomplished by placing measured lead weights on the opposite side of the "heavy
spot"—the noticeable tread wear on your unbalanced tire.
Every time a wheel is first
mounted onto the rim with a new tire, it has to be balanced. The goal is to make sure the weight is even
around the wheel. |
|
Often
confused with wheel alignment, a properly balanced wheel is a beautiful, perfectly tuned wheel-tire
combination. This is accomplished by placing measured lead weights on the opposite side of the "heavy
spot"—the noticeable tread wear on your unbalanced tire.
Request A Tire Quote
Click here to request
a quote on tires online
Jimyz Automotive
(330) 626-1198

|
|
Wheel balance is checked
on a wheel balancing machine that can sense as little as 1/4 ounce difference in weight around the wheel. Why worry
about 1/4 ounce on a wheel that weighs many pounds? That tiny amount of weight is traveling very fast around the
axle: hundreds of times a minute. It creates enough momentum to cause serious vibration. And when you multiply by 4
wheels, the wobble really adds up. Unbalanced tires put uneven pressure on the treads. Tires get too hot and wear
unevenly. Tire imbalance can also strain the wheel bearings and suspension system.
To balance the tires, our
technicians places tiny offsetting weights at specific points around the wheel.
Not "once and done"
The minute you pull away from the service station with your newly balanced tires, they begin getting out of balance
again. Every bump and corner affects balance; so does tire wear. Over time, your tires get out of balance again.
That's why it's important to have tires balanced regularly.
What
are the warning signs that my tires aren't balanced?
You're most likely to notice uneven wear on the tires. Many drivers also notice vibration over 40 mph, especially if
the imbalanced tires are on the front.
How often should my tires be balanced?
During typical use, it's a good idea to have your tires rotated and balanced every 4,000 to 6,000 miles. Have them
balanced any time a tire is replaced or patched.
How do I know if I need
my wheels balanced?
Is
your vehicle vibrating at certain speeds, say, between 50 and 70 mph? If so, chances are your wheel is out of
balance.
One
section of your tire is heavier than the other because it's endured more exposure to the friction and heat of the
road. Most people are very satisfied with the difference such a simple and inexpensive procedure makes.
Look for these signs, and if you find either one, come see us:
● Scalloped, erratic wear pattern on tires.
● Vibration in steering wheel, seat, or floorboard at certain
speeds.
TPMS - Tire Pressure Monitoring System
As part of the effort to increase awareness of the need to maintain proper
tire pressure, the U.S. government has taken steps to make it easier for
drivers to be aware of potentially unsafe low pressure in their tires. As of the 2008 model year, the
National Highway Traffic Safety Administration (NHTSA) now requires that all passenger cars and light
trucks feature the Tire Pressure Monitoring System (TPMS). In conjunction with the new requirements,
the Alliance of Automobile Manufacturers (AAM) has initiated a consumer safety campaign focusing on
the importance of maintaining proper tire pressure.
We service Tire Pressure Monitoring Systems (TPMS)
TPMS is an automated system that monitors the air pressure in a vehicle's tires.
When
air pressure in one or more tires drops 25 percent or more below the correct pressure, a warning
indicator alerts the driver. TPMS typically delivers these alerts to the driver through one of two
types of warning lights on the dashboard.
1. The first uses the official TPMS symbol, which is a cross-section of a tire with an exclamation
mark in the center.
2. The second is a top-view graphic image of a car that indicates which tires are low.
Tire pressure is monitored through one of two methods: direct or indirect. Direct TPMS monitors
the actual air pressure inside each tire via a sensor mounted within the tire. Indirect TPMS measures
tire pressure by monitoring the speed and rotation of each individual wheel. When a significant
variation in speed and rotation is detected in one or more wheels when compared with the others, it is
often an indication of underinflation. This information is then transmitted to the vehicle's on-board
computer, and the driver is alerted.

However, while TPMS systems offer increased safety to drivers through low pressure
warnings, they are not meant to be a substitute for proper tire pressure maintenance.
We service Tire Pressure Monitoring Systems (TPMS)
Sources: NHTSA, AAM, Intelligent Tire Conference
|
|